Enviro I Tarp System Conversion Kit (From Michel's Select)

This kit is to convert your existing Michel's Select System, over to the Enviro I System.

This Kit Includes:

1x Rolltube WIth Spline

1x Fiberglass Flat

1x Complete Short Crank Assembly

1x 1/2" Flip Release Pipe

Flip Release Tarp Stops

1x 5" Crank Handle Bracket

1x 20oz Tar Fabric with 2 Loading Holes

For the Occasional Hauler

“Working towards a cleaner Environment”

Tension is applied to the front and rear of the “Travel” tarp using beveled pulleys to keep the tarp rolling evenly.

Tension is applied to the Enviro / Loading tarp with a rope and spring inserted inside the roll tube on the opposite end of the crank.

A fiberglass rod is sewn into the middle of the travel tarp to support the fabric.

The loading tarp incorporates the use of loading holes for dust containment. Depending on the length of trailer, the number of loading holes can vary.

The Envio/ Loading Tarp assembly is lifted over the “travel” tarp and is locked under an aluminum locking flange.

Enviro tarp fits like a Select side roll tarp system. During Highway use the loading tarp remains in the open position and is secured in place using a crank and lock assembly.

When the Enviro/ Loading tarp is in the open position and the “travel tarp” is in the closed position, the two roll tubes are locked in place using two individual crank assemblies.

Conversion kits on existing Michel’s tarp systems are also available.

STANDARD FEATURES:

– 20 oz.. PVC fabric

– Reinforced edges on front, rear and sides

– 16 colors to chose from

OPTIONS:

– Reinforcements over the cross members on “Travel Tarp”

– 2 Fiberglass rods inserted in the Enviro/ Loading tarp fabric for added support

Please contact us at (306) 563-4443 or email info@canoraweaving.com if you have any questions.

We have been an authorized dealer and installer for Michel's Industries Tarp Systems for over 30 years.