Description
This kit is to convert your existing Michel's Select System, over to the Enviro II System.
This Kit Includes:
2x Load-Loc Tension Control Assembly
1x Rolltube With Spline
1x Fiberglass Flat
1x Complete Short Crank Assembly
1x 1/2" Flip Release Pipe
Flip Release Tarp Stops
1x 5" Crank Handle Bracket
1x 20oz Tar Fabric with 2 Loading Holes
2x Ratchet Straps with Hood Brackets
Filler Plate to Match Trailer Length
Alter Existing Tarp Fabric for Loading Holes
For the Everyday Enviro Hauler
“Working towards a cleaner environment”
The “Enviro II” incorporates two “Load-Loc” returns (rope attached to a spring inside each roll tube) to act as tension control on the opposite end of the crank assemblies.
The Enviro/ Loading tarp is mounted underneath the “travel tarp” allowing it to fit like a regular side rolling tarp system. The Enviro/ loading tarp entertains 18″ loading holes that aid in dust containment. The number of loading holes depends on trailer length.
The crank assemblies can be either installed on the front or rear of the trailer depending on customers preference.
Both tarps are locked into place for travel using two crank assemblies and aluminum locking flange.
The “Travel” tarp has one fiberglass rod sewn into the tarp fabric for support and the Enviro/ Loading tarp has two off-centered fiberglass rods sewn into the fabric for support.
“Conversion kits” on existing Michel’s tarp systems are also available. Conversion kits will keep the fiberglass center rod in the travel tarp and will also come with 2 straps which are attached to brackets on the front and rear hood/ end-cap to aid in supporting the Enviro/ Loading tarp.
STANDARD FEATURES:
– 20oz. PVC fabric
– Reinforced edges on front, rear and sides
– 18 colors to choose from
OPTIONS:
– Reinforcements over the cross members on “Travel Tarp”
Please contact us at (306) 563-4443 or email info@canoraweaving.com if you have any questions.
We have been an authorized dealer and installer for Michel's Industries Tarp Systems for over 30 years.
